Control your heating using the APP or touch screen
Firstly, it is important to note that the app is customised for each home, meaning the interface may vary from what is shown in the images. However, we strive to maintain a consistent layout and logic to ensure a familiar experience for all users.
Introduction
Just like lights, heaters can be controlled in different ways. However, before exploring the controls, it’s helpful to understand how they work—so let’s dive in.
Firstly, all thermostats can be turned on or off. When set to off, the heaters remain off. However, if the thermostat is on, it does not necessarily mean the heaters are running. The heaters will only activate if the thermostat’s set temperature (known as the target temperature) is higher than the room’s current temperature. Once a target temperature is set, the heaters will cycle on and off to maintain the desired level, turning on when the current temperature drops below the target and off when it exceeds it.”
The app displays three possible thermostat states:
- idle (off) =
(Heater is IDLE) & (thermostat is OFF) - Everything is OFF and won't come on automatically. Usually set while you are away. - idle (heat) =
(Heater is IDLE) & (thermostat ON) - Heater is OFF as the set TARGET temperature is BELOW the CURRENT room temperature. - heating (heat) =
(Heater is HEATING) & (thermostat is ON) - Heater is ON as the set TARGET temperature is ABOVE the CURRENT room temperature.
Compact thermostat view
Standard thermostat view
Simple Heaters (without temperature control)
These heaters are typically found in bathrooms. They are not temperature-controlled and operate using a simple toggle switch.
Related Articles
Setting heating schedules (step-by-step)
Important information Thermostat Manual Mode For the heaters to function, the thermostat must be set to manual mode, indicated by a small hand icon when powered on. If it is not in manual mode, press the bottom-right button until the hand icon ...Electric heater troubleshooting
Heater Setup Requirements For the heaters to function correctly, the following prerequisites must be met: Power Requirements The heater must be switched on. The fused switch next to the heater must be in the “on” position. The wall thermostat is also ...Controlling lights
Lights Switches The most common type of light control is a simple on/off switch. These can be displayed in different ways: 1) A button This will feature a room icon at the top and the name below. When the light is on, the icon changes colour, for ...Controlling dimmable lights
If your property has dimmable lights, they will be displayed and controlled as shown below. 1) Sliders Tap the circular icon to turn on or touch the bar at your desired level Slide the bar up or down to set the desired level. Note that setting the ...