Controlling your heating using the thermostat

Controlling your heating using the thermostat

Using Your Thermostat



Controlling your heating is easy:
  1. Press the centre circle button at the bottom to turn the thermostat on or off.
  2. Make sure it’s in manual mode (shown by a small hand). If not, press the mode button (bottom left) until the hand appears.
  3. Use the up and down arrows on the right to adjust the temperature.
The screen shows the current room temperature. Tap the up arrow to set a higher temperature — after about 5 seconds, a small flame icon will appear, meaning the heating is on. Set your desired temperature and you’re done.

Further help:
  1. No need to set the clock — it updates automatically.
  2. If the lock icon is displayed you can unlock the thermostat by holding the up and down arrows together for 5 seconds.
  3. To create schedules, use the Nifty app.
  4. If something is not functioning correctly see here

    • Related Articles

    • Control your heating using the APP or touch screen

      Firstly, it is important to note that the app is customised for each home, meaning the interface may vary from what is shown in the images. However, we strive to maintain a consistent layout and logic to ensure a familiar experience for all users. ...

    • Setting heating schedules (step-by-step)

      Important information Thermostat Manual Mode For the heaters to function, the thermostat must be set to manual mode, indicated by a small hand icon when powered on. If it is not in manual mode, press the bottom-right button until the hand icon ...

    • Controlling lights

      Lights Switches The most common type of light control is a simple on/off switch. These can be displayed in different ways: 1) A button This will feature a room icon at the top and the name below. When the light is on, the icon changes colour, for ...

    • Controlling dimmable lights

      If your property has dimmable lights, they will be displayed and controlled as shown below. 1) Sliders Tap the circular icon to turn on or touch the bar at your desired level Slide the bar up or down to set the desired level. Note that setting the ...

    • Electric heater troubleshooting

      Heater Setup Requirements For the heaters to function correctly, the following prerequisites must be met: Power Requirements The fused switch next to the heater must be in the “on” position. The wall thermostat is also connected to this switch, so if ...